Information about Pigments used in Permanent Cosmetics
(by Linda H. Dixon, MD)
Colors from vegetables are not used in tattooing. So called "Vegetable" dyes are not natural but man-made chemical colors. These synthetic organic pigments are used to dye fruits and vegetables artificially to brighter colors. They are used to make oranges look MORE orange. To make margarine look yellow, like butter. But they are far from natural. The most naturally occuring pigments we can use in our profession are iron oxides. Pigments found in vegetables in nature are not used in permanent makeup. Spinach, carrots and beets are colorful but not useful for tattooing. No lawsuits have been filed with iron oxide based pigments, unlike so-called "vegetable dyes" or synthetic organic pigments.
Inorganic Pigments Iron oxides (Fe2O3 and Fe3O4) lack a carbon molecule and are therefore "inorganic". Iron oxides in nature (dirt) are often found in association with toxic metals like lead, arsenic, mercury, antimony and selenium. Therefore, the FDA has regulated cosmetic colorants so the level of toxic metal present are below certain percentages in order to be used safely.
Synthetic iron oxides are manufactured to eliminate the contamination of naturally occurring iron oxides. These metals are basically inert, although iron oxide blacks (magnetite) do have magnetic properties. Iron oxides are a softer metal than titanium dioxide.Iron oxide molecules are crystals and are in different shapes. Some are spherical, others are rhomboids and yet others look like a pencil shaped crystal (long and narrow). Ultraviolet light can affect the crystalline structure and result in loss of color activity. Light fastness or "reflectance" describes a particle's ability to reflect light at a certain wavelength. Most synthetic iron oxides are manufactured in the visible light spectrum and have maintain good reflectance. Examples of the endurance of iron oxides are the cave paintings which have endured thousands of years in darkness.
Particle Size
It is a mistaken belief that pigment particles are 6 microns or greater. The fact is that the average iron oxide particle size is less than one micron. However, the particles are attracted to each other and form "agglomerates". When the particles are measured in a suspension it is common to get a particle size measurement of 1-20 microns because the agglomerates are being measured in addition to the individual particles. Although iron oxides are inorganic, they are often dispersed in glycerin or alcohol which are organic substances.
Carbon Black
Common in inks used for tattooing, the carbon black particle is usually "amorphous" which mean without shape. Some of these particles are a tiny .03 microns. This means it is from 10-20 timessmaller in size than an iron oxide pigment particle. And carbon black is soluble in liquids and therefore becomes an INK! My personal belief is that this ultra-small size combined with the solubility is why we will often see migration or "bleeding" of carbon black inks into surrounding tissues.
An example of carbon black ink is HIGGINS India Ink. Because lead is no longer legal in the U.S. as an additive to carbon black, even India Ink or Pelikan Ink have lost their "black blackness". Carbon black was illegal for use in cosmetics in the United States because of a case of blindness that resulted from its use in mascara. Carbon black is legal in other countries, and is used widely in the US by tattooists. Now high grade furnace black is approved for use in cosmetics.
Solubility
By definition, a pigment is a particle and NOT soluble in solution. If a colorant dissolves in solution then it becomes a dye. Think of Kool-Aid. It is a powder in the package but dissolves in water. Think of coffee too. When you spill a cup of coffee on a white tablecloth it spreads everywhere. But if you dump a cup of coffee grounds on the tablecloth it stays where it was placed and doesn't spread. Various dispersal agents such as glycerin, ethyl alcohol, Witch Hazel, water, castor oil, propylene glycol and others are used to keep the particles from forming clumps.Remember that pigment particles are weakly attracted to each other.
Organic
Organic pigments are frequently the culprits in allergic reactions in permanent makeup. Often marketed as "vegetable dyes", consumers are misled to believe they are "natural". But they are not. Rarely organic colors such as "coal tar" have been determined to have undesirable effects including causing cancer. But this is an exception. Therefore, whether a color is organic or inorganic does not determine the safety of that color. One manufacturer feels strongly FOR organic pigments and yet another feels strongly FOR iron oxides. Just remember that "bright" colors are organic in origin and earth colors are inorganic. Carmine is a naturally occurring red pigment from cochineal extract (beetles)in South America. It is added to some iron oxide pigment lip colors by other manufacturers.
Properties of pigments
The smaller a pigment becomes the more translucent it becomes. This is true of even the most opaque pigment, titanium dioxide.
Science is making "nano particles" which are a thousand times smaller than "micronsized" particles. The larger the particle size the more light it will reflect and the more opaque it will become.
Adverse Effects
Iron oxides contain nickel and a large percentage of the population tested is allergic to nickel (17.9%). Tattoo needles,including surgical grade stainless steel needles, contain nickel (8.2%). So sensitivity to pigments can and does occur, even to iron oxides. The fact that organic colorants do not contain nickel is good. However, the inert iron oxides are very safe despite the presence of nickel. Organic pigments can cause severe allergic reactions and granulomas that are difficult to treat. Fortunately, this is rare. Most adverse effects come from sensitivity to antibiotic ointments applied after the permanent cosmetic procedure.
Iron Oxide pigments
In nature, iron oxides exist in reds, yellows, blacks, ochre, umbre and burnt umber. Synthetic iron oxides come in several shades of red, yellow and black. A pigment has both a "top tone" and an "undertone". So in addition to dealing with the undertones in the client's skin, you must take into account the "undertone" in the pigment.
Titanium Dioxide
Compared to iron oxides, titanium dioxide is very opaque. However, although white in appearance, it also has undertones (DuPont) which may be blue on the light spectrum in some cases. It is often mixed with blacks, reds and yellows to lighten (tint) the original hue (color) of the cosmetic color.
Loss of color over time
a) Exposure to sunlight or UV light b) Body breaks down foreign bodies when possible and eliminates them
c) Use of glycolics, Retin-A and other new products for wrinkle treatments are having an adverse effect on permanent makeup.
Allergic Reactions: More Common in Organic pigments
Allergic reactions to pigments are more commonly seen in organic pigments. Dr. Norman Goldstein, a Hawaii dermatologist, discovered over 25 years ago that the reactions to red pigments used in tattoos were actually phototoxicity reactions to the YELLOW "Cadmium sulfide" added to the reds. Soldiers and sailors exposed to the Hawaiian sun would notice their tattoos getting raised and puffy in the areas of RED color.
Often times a claim of an "allergic reaction" is made after lip color when in fact the culprit may be from an outbreak of fever blisters or overworking the lips with the needles. Bumps will occur in this case. This should NOT be mistakenly diagnosed as an allergic reaction.
A tiny tissue “punch” biopsy is needed to confirm ANY suspected allergic reaction. Because litigation is frequent with allergic reactions, always have your client get a small punch biopsy by their dermatologist to determine the cause of their reaction.
There is no perfect treatment for allergic reactions. Some have tried overtattooing with salt water or Kenalog, others utilize topical or systemic steroids. Still others use CO2 laser because some lasers have been observed to darken pigments including titanium dioxide and some iron oxides. Multiple treatments are required and scars may result. A "spot test" of the laser is usually conducted to see if it will safely remove the color. Injections of steroids locally usually wear off and the reaction will flare again. Steroids actually cause thinning of the skin as well. The goal is to let or get the offending pigment out. The skin must be opened up so the pigment can be removed. Surgery is sometimes needed to control or remove the skin involved in the allergic reaction.
There are advantages to both inorganic and organic color additives (pigments). KolorSource™ pigments use KOSHER ingredients for their dispersal agents.
All of the above information is by Dr. Linda Dixon and taken directly from Kolorsource.
Inorganic Pigments Iron oxides (Fe2O3 and Fe3O4) lack a carbon molecule and are therefore "inorganic". Iron oxides in nature (dirt) are often found in association with toxic metals like lead, arsenic, mercury, antimony and selenium. Therefore, the FDA has regulated cosmetic colorants so the level of toxic metal present are below certain percentages in order to be used safely.
Synthetic iron oxides are manufactured to eliminate the contamination of naturally occurring iron oxides. These metals are basically inert, although iron oxide blacks (magnetite) do have magnetic properties. Iron oxides are a softer metal than titanium dioxide.Iron oxide molecules are crystals and are in different shapes. Some are spherical, others are rhomboids and yet others look like a pencil shaped crystal (long and narrow). Ultraviolet light can affect the crystalline structure and result in loss of color activity. Light fastness or "reflectance" describes a particle's ability to reflect light at a certain wavelength. Most synthetic iron oxides are manufactured in the visible light spectrum and have maintain good reflectance. Examples of the endurance of iron oxides are the cave paintings which have endured thousands of years in darkness.
Particle Size
It is a mistaken belief that pigment particles are 6 microns or greater. The fact is that the average iron oxide particle size is less than one micron. However, the particles are attracted to each other and form "agglomerates". When the particles are measured in a suspension it is common to get a particle size measurement of 1-20 microns because the agglomerates are being measured in addition to the individual particles. Although iron oxides are inorganic, they are often dispersed in glycerin or alcohol which are organic substances.
Carbon Black
Common in inks used for tattooing, the carbon black particle is usually "amorphous" which mean without shape. Some of these particles are a tiny .03 microns. This means it is from 10-20 timessmaller in size than an iron oxide pigment particle. And carbon black is soluble in liquids and therefore becomes an INK! My personal belief is that this ultra-small size combined with the solubility is why we will often see migration or "bleeding" of carbon black inks into surrounding tissues.
An example of carbon black ink is HIGGINS India Ink. Because lead is no longer legal in the U.S. as an additive to carbon black, even India Ink or Pelikan Ink have lost their "black blackness". Carbon black was illegal for use in cosmetics in the United States because of a case of blindness that resulted from its use in mascara. Carbon black is legal in other countries, and is used widely in the US by tattooists. Now high grade furnace black is approved for use in cosmetics.
Solubility
By definition, a pigment is a particle and NOT soluble in solution. If a colorant dissolves in solution then it becomes a dye. Think of Kool-Aid. It is a powder in the package but dissolves in water. Think of coffee too. When you spill a cup of coffee on a white tablecloth it spreads everywhere. But if you dump a cup of coffee grounds on the tablecloth it stays where it was placed and doesn't spread. Various dispersal agents such as glycerin, ethyl alcohol, Witch Hazel, water, castor oil, propylene glycol and others are used to keep the particles from forming clumps.Remember that pigment particles are weakly attracted to each other.
Organic
Organic pigments are frequently the culprits in allergic reactions in permanent makeup. Often marketed as "vegetable dyes", consumers are misled to believe they are "natural". But they are not. Rarely organic colors such as "coal tar" have been determined to have undesirable effects including causing cancer. But this is an exception. Therefore, whether a color is organic or inorganic does not determine the safety of that color. One manufacturer feels strongly FOR organic pigments and yet another feels strongly FOR iron oxides. Just remember that "bright" colors are organic in origin and earth colors are inorganic. Carmine is a naturally occurring red pigment from cochineal extract (beetles)in South America. It is added to some iron oxide pigment lip colors by other manufacturers.
Properties of pigments
The smaller a pigment becomes the more translucent it becomes. This is true of even the most opaque pigment, titanium dioxide.
Science is making "nano particles" which are a thousand times smaller than "micronsized" particles. The larger the particle size the more light it will reflect and the more opaque it will become.
Adverse Effects
Iron oxides contain nickel and a large percentage of the population tested is allergic to nickel (17.9%). Tattoo needles,including surgical grade stainless steel needles, contain nickel (8.2%). So sensitivity to pigments can and does occur, even to iron oxides. The fact that organic colorants do not contain nickel is good. However, the inert iron oxides are very safe despite the presence of nickel. Organic pigments can cause severe allergic reactions and granulomas that are difficult to treat. Fortunately, this is rare. Most adverse effects come from sensitivity to antibiotic ointments applied after the permanent cosmetic procedure.
Iron Oxide pigments
In nature, iron oxides exist in reds, yellows, blacks, ochre, umbre and burnt umber. Synthetic iron oxides come in several shades of red, yellow and black. A pigment has both a "top tone" and an "undertone". So in addition to dealing with the undertones in the client's skin, you must take into account the "undertone" in the pigment.
Titanium Dioxide
Compared to iron oxides, titanium dioxide is very opaque. However, although white in appearance, it also has undertones (DuPont) which may be blue on the light spectrum in some cases. It is often mixed with blacks, reds and yellows to lighten (tint) the original hue (color) of the cosmetic color.
Loss of color over time
a) Exposure to sunlight or UV light b) Body breaks down foreign bodies when possible and eliminates them
c) Use of glycolics, Retin-A and other new products for wrinkle treatments are having an adverse effect on permanent makeup.
Allergic Reactions: More Common in Organic pigments
Allergic reactions to pigments are more commonly seen in organic pigments. Dr. Norman Goldstein, a Hawaii dermatologist, discovered over 25 years ago that the reactions to red pigments used in tattoos were actually phototoxicity reactions to the YELLOW "Cadmium sulfide" added to the reds. Soldiers and sailors exposed to the Hawaiian sun would notice their tattoos getting raised and puffy in the areas of RED color.
Often times a claim of an "allergic reaction" is made after lip color when in fact the culprit may be from an outbreak of fever blisters or overworking the lips with the needles. Bumps will occur in this case. This should NOT be mistakenly diagnosed as an allergic reaction.
A tiny tissue “punch” biopsy is needed to confirm ANY suspected allergic reaction. Because litigation is frequent with allergic reactions, always have your client get a small punch biopsy by their dermatologist to determine the cause of their reaction.
There is no perfect treatment for allergic reactions. Some have tried overtattooing with salt water or Kenalog, others utilize topical or systemic steroids. Still others use CO2 laser because some lasers have been observed to darken pigments including titanium dioxide and some iron oxides. Multiple treatments are required and scars may result. A "spot test" of the laser is usually conducted to see if it will safely remove the color. Injections of steroids locally usually wear off and the reaction will flare again. Steroids actually cause thinning of the skin as well. The goal is to let or get the offending pigment out. The skin must be opened up so the pigment can be removed. Surgery is sometimes needed to control or remove the skin involved in the allergic reaction.
There are advantages to both inorganic and organic color additives (pigments). KolorSource™ pigments use KOSHER ingredients for their dispersal agents.
All of the above information is by Dr. Linda Dixon and taken directly from Kolorsource.